Dealing with a Sudden Water Heater Failure: Key Steps
Dealing with a Sudden Water Heater Failure: Key Steps
Blog Article
Have you been hunting for facts and techniques on How to Troubleshoot and Repair an Electric Water Heater?
Many modern homes utilize an electric water heater for their heater, because of its ease as well as convenience of use. Nonetheless, much like any other electrical devices, troubles may occur with its usage, unexpectedly. It can be really aggravating to wake up to a cool shower as opposed to a warm one or having your bathroom with water that isn't hot adequate and even as well hot. Whatever the instance might be, water heater troubles can be rather stressful. Thankfully, we've made a checklist of possible solutions to your hot water heater problems. There are a number of factors that can trigger a lot of these problems, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the main power supply for safety and security. Whatever the trouble is, getting it repaired must not position excessive of a concern if you comply with these steps:
Call A Specialist:
If after changing all malfunctioning parts and also resetting your temperature level, the water heater still isn't functioning, you may require to call a professional plumber for a specialist viewpoint. The issue with your heater could be that the hot and cold faucets have been switched over or it might be undersized for the amount of warm water required in your home. Whatever the instance may be, a professional plumber would certainly help resolve the trouble.
Check Your Power Supply:
As standard as this might seem, it is extremely required. Without appropriate power, your hot water heater will not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the problem, just transform it on and off once more. Change any broken or worn-out fuse. Test the appliance with power after these changes to see if it's currently functioning.
Examine Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't warm sufficient, you may need to inspect the temperature level settings on your upper thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the gain access to panel and also press the red button for temperature level reset above the thermostat. This must help heat up the water. Turn the breaker back on and also check if the issue has been resolved.
Inspect the Heating Element in the Water Heater:
If it's not a power trouble, after that attempt having a look at your heating element if it is still working. Test each of your heating elements to be sure the issue isn't with any of them. If any of them is faulty, change that component and after that inspect whether the warm water is back on.
Conclusion
Hot water heater troubles are not constantly major. A lot of them are due to small problems like a blown fuse or damaged heating element. Replacing the damaged parts need to suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your nearby plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our excerpt on No Hot Water — Water Heater Repair. Thank you for taking a few minutes to read through our piece. So long as you appreciated our blog entry plz remember to pass it around. We value reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Comprehensive support here. Report this page